|
|
|
National Stock Number:
5315-01-531-3637
Federal Supply Class:
5315
National Item Identification Number:
015313637
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| BYLB244 | 05624 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.375 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM | | FIRST END STYLE | SQUARE | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,STRAIGHT,HEADLESS | | PIN OVERALL DIAMETER | 0.0920 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.031 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|