|
|
|
National Stock Number:
5315-01-530-6638
Federal Supply Class:
5315
National Item Identification Number:
015306638
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 533050-41 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FIRST END LOCATION | THREADED END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643, COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD SIZE | 0.170 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,GUIDE,CHASSIS | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END TIP RADIUS | 0.020 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHANK DIAMETER | 0.170 INCHES NOMINAL | | SHANK LENGTH | 0.120 INCHES NOMINAL | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | TWO UNDERCUTS SECOND 0.020 WIDTH, 0.126 DIA | | STYLE DESIGNATOR | UNDERCUT | | SURFACE FINISH | 16.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.187 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC | | UNDERCUT WIDTH | 0.020 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.126 INCHES NOMINAL |
|
|