|
|
|
National Stock Number:
5315-01-524-2684
Federal Supply Class:
5315
National Item Identification Number:
015242684
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 6071-A101-128 | 0DZR6 | CONTRACT FABRICATION AND DESIGN, LLC |
|
Techincal Specification:
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416. TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.687 INCHES NOMINAL | | FIRST END OUTER RADIUS | 0.250 INCHES NOMINAL | | FIRST END STYLE | ROUND | | FIRST HOLE DIAMETER | 0.128 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, MOUNT BLOCK, AMMO BOX, TOW PLATE, HH-60 | | PIN OVERALL DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.375 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.052 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | HEAT TREAT: 125-145 KSI PER MIL-H-6875; YELLOW CADMIUM PER QQ-P-416, TYPE II CLASS 2, POST BAKE AT 375 DEGREE FOR 3 HOURS |
|
|