|
|
|
National Stock Number:
5315-01-523-3174
Federal Supply Class:
5315
National Item Identification Number:
015233174
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10026077 | 61C19 | MIL-COTS CORPORATION | | 12641157 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 12759-00315 | 0Y3H3 | FASTENAL COMPANY | | 26795 | 0Y3H3 | FASTENAL COMPANY | | 3244032 | 45152 | OSHKOSH CORP | | 3244032 | 75Q65 | OSHKOSH DEFENSE LLC | | AEP22X375C00GE3A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GE4A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GE5A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GE6A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GE7A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GE8A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GE9A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GF0A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GF1A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AEP22X375C00GF2A11 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | ASME B18.8.2 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS |
|
Techincal Specification:
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.3749 INCHES MINIMUM AND 0.3751 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.000 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
|
|