|
|
|
National Stock Number:
5315-01-520-5161
Federal Supply Class:
5315
National Item Identification Number:
015205161
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 5HG90852-115 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.132 INCHES NOMINAL | | FIRST END LOCATION | LONG END | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.025 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | FIRST STEP DIAMETER | 0.500 INCHES NOMINAL | | FIRST STEP LENGTH | 0.300 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INDEX FRAME DETAILS LEADING EDGE | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 0.190 INCHES | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.010 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND STEP DIAMETER | 0.190 INCHES NOMINAL | | SECOND STEP LENGTH | 2.540 INCHES NOMINAL | | SPECIAL FEATURES | GROOVE 0.060 WIDTH, RADIUS 0.030 LOCATED AFTER THREADS; LAST SHOULDER IS MEDIUM DIAMOND KNURL 33 PER INCH PERASME B94.6 | | STYLE DESIGNATOR | SHOULDER | | THIRD STEP DIAMETER | 0.120 INCHES MINIMUM AND 0.124 INCHES MAXIMUM | | THIRD STEP LENGTH | 0.425 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.325 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|