|
|
|
National Stock Number:
5315-01-484-3379
Federal Supply Class:
5315
National Item Identification Number:
014843379
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 00185180-01 | 8X691 | SIERRA NEVADA COMPANY, LLC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.500 INCHES NOMINAL | | FIRST END LOCATION | SHANK END | | FIRST END STYLE | SQUARE | | FIRST HOLE DIAMETER | 0.358 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 15.250 INCHES NOMINAL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD SIZE | 0.750 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | LIFTING EYE | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.500 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.750 INCHES NOMINAL | | SECOND SHANK LENGTH | 8.250 INCHES NOMINAL | | SHANK DIAMETER | 0.600 INCHES NOMINAL | | SHANK LENGTH | 1.000 INCHES NOMINAL | | SHOULDER DIAMETER | 1.125 INCHES NOMINAL | | SPECIAL FEATURES | MASK HOLE AND THREADS PRIOR TO PRIME AND PAINT; REMOVE BURRS, BREAK SHARP EDGES | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT | PASSIVATE AND PRIMER AND PAINT OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 2.630 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 10 |
|
|