|
|
|
National Stock Number:
5315-01-483-0265
Federal Supply Class:
5315
National Item Identification Number:
014830265
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 7-2522 | 96736 | SWEENEY ENGINEERING CORP | | 7-2522-1 | 96736 | SWEENEY ENGINEERING CORP |
|
Techincal Specification:
| FIRST END COUNTERBORE DEPTH | 0.390 INCHES NOMINAL | | FIRST END COUNTERBORE DIAMETER | 0.529 INCHES NOMINAL | | FIRST END STYLE | COUNTERBORED W/O THRU HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1215 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PLUNGER | | PIN OVERALL LENGTH | 1.849 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.7160 INCHES NOMINAL | | SECOND END STYLE | SLOTTED | | SECOND END OUTER RADIUS | 0.008 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END SLOT DEPTH | 1.459 INCHES NOMINAL | | SECOND END SLOT WIDTH | 0.100 INCHES NOMINAL | | SPECIAL FEATURES | STYLE VERY UNIQUE;CHAMFERED TIP IS CUT AT A 30 DEGREE ANGLE AND THE END IS CUT AT .100 DIAMER WITH A SLOT ALL THE WAY THROUGH THE ITEM UNTIL IT MEETS THE OPEN END;OPEN END HAS A THRU SLOT 0.041 X .188, EXTERNALLY THREADED END .500 UN 3A | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE AND QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM AND NICKEL OVERALL |
|
|