|
|
|
National Stock Number:
5315-01-351-6343
Federal Supply Class:
5315
National Item Identification Number:
013516343
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| S107-3000 ITEM 1 | 63504 | PALFINGER MARINE USA, LLC | | S107-3000-REV S | 64803 | WATERCRAFT AMERICA INC | | S107-3000 ITEM 1 | 64803 | WATERCRAFT AMERICA INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.408 INCHES MINIMUM AND 0.538 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.172 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PIN OVERALL DIAMETER | 0.6250 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.000 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | DRILLED HOLE IS COUNTERSUNK 0.172 IN. DIA,0.060 IN. DEEP ON A 45 DEGREE ANGLE |
|
|