| DIAMETER | 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.813 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE TO FLAT | 0.245 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.130 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.3125 INCHES NOMINAL |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | DEE |
| HEIGHT | 0.580 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | DRILLED THRU HEAD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 630 OVERALL |
| PIN HEAD DIAMETER | 0.610 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 2,OR 8 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDERCUT DIAMETER | 0.290 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| UNDERCUT RADIUS | 0.080 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 3.540 INCHES NOMINAL |