| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.350 INCHES NOMINAL |
| CHAMFER LENGTH | 0.078 INCHES NOMINAL |
| DIAMETER | 0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HEIGHT | 0.093 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8965 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S06758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL |
| PIN HEAD DIAMETER | 0.625 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| SECOND HOLE DIAMETER | 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| SHEAR STRENGTH | 29440 DOUBLE POUND |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY II CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| UNDER HEAD LENGTH | 2.334 INCHES MINIMUM AND 2.354 INCHES MAXIMUM |