|
|
|
National Stock Number:
5315-01-271-1011
Federal Supply Class:
5315
National Item Identification Number:
012711011
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 865A1115 | 00994 | COLUMBUS JACK CORPORATION |
|
Techincal Specification:
| EFFECTIVE LENGTH | 5.593 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.000 INCHES NOMINAL | | DIAMETER | 0.740 INCHES MINIMUM AND 0.745 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.530 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 6.060 INCHES NOMINAL | | MATERIAL | STEEL COMP 1117 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM | | STYLE DESIGNATOR | GROOVE | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | UNDERCUT DIAMETER | 0.700 INCHES MINIMUM AND 0.707 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM |
|
|