|
|
|
National Stock Number:
5315-01-268-4730
Federal Supply Class:
5315
National Item Identification Number:
012684730
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 5300646-2 | 16128 | GICHNER SYSTEMS GROUP INC GICHNER MOBILIZER DIV | | 5300646-2 | 29381 | GICHNER SYSTEMS GROUP, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.380 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.250 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.090 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.406 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 1.5000 INCHES MINIMUM AND 1.5015 INCHES MAXIMUM | | PIN OVERALL LENGTH | 7.000 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | MATT | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.406 INCHES NOMINAL | | SPECIAL FEATURES | STEEL,ALLOY,BAR,4100 THRU 4145,4340,8640 THRU 8645 OR 8740; DOLLY SET,LIFT TRANS; (2330-01-167-7262) | | TEST DATA DOCUMENT | 16128-5300646 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|