| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.050 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 1.0335 INCHES MINIMUM AND 1.0340 INCHES MAXIMUM |
| FIRST STEP LENGTH | 1.515 INCHES MINIMUM AND 1.525 INCHES MAXIMUM |
| HEIGHT | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP XM-12 OVERALL |
| PIN HEAD DIAMETER | 1.375 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM |
| SECOND STEP LENGTH | 1.725 INCHES MINIMUM AND 1.745 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BPS4006,TY2 CL3 CAGEC 97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THIRD STEP DIAMETER | 0.855 INCHES MINIMUM AND 0.865 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 4.340 INCHES MINIMUM AND 4.350 INCHES MAXIMUM |