| DIAMETER | 0.750 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL |
| EFFECTIVE LENGTH | 2.200 INCHES NOMINAL |
| ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| HEAD STYLE | ROUND W/WRENCH FLATS CHAMFERED |
| HEIGHT | 0.250 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| MATERIAL | STEEL COMP 4130 OVERALL |
| PIN HEAD DIAMETER | 1.500 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND HOLE DIAMETER | 0.155 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| SECOND UNDERCUT DIAMETER | 0.880 INCHES NOMINAL |
| SECOND UNDERCUT WIDTH | 0.120 INCHES NOMINAL |
| SPECIAL FEATURES | THREADED END 0.750-16 UNF-2A |
| WIDTH ACROSS FLATS | 1.240 INCHES NOMINAL |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| UNDERCUT DIAMETER | 0.650 INCHES NOMINAL |
| UNDER HEAD LENGTH | 3.300 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.220 INCHES NOMINAL |