|
|
|
National Stock Number:
5315-01-219-7336
Federal Supply Class:
5315
National Item Identification Number:
012197336
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 345 9667 | 34914 | HIAB USA INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 96.0 MILLIMETERS MINIMUM AND 98.0 MILLIMETERS MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 11.0 MILLIMETERS NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 5.0 MILLIMETERS NOMINAL | | FIRST HOLE DIAMETER | 9.0 MILLIMETERS MINIMUM AND 10.2 MILLIMETERS MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | PIN OVERALL DIAMETER | 25.00 MILLIMETERS NOMINAL | | PIN OVERALL LENGTH | 119.0 MILLIMETERS NOMINAL | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 9.0 MILLIMETERS MINIMUM AND 10.2 MILLIMETERS MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE FINISH | 25.0 MICROINCHES CHAMFERED END | | SURFACE FINISH | 50.0 MICROINCHES BOTH ENDS |
|
|