| CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.566 INCHES MINIMUM AND 7.570 INCHES MAXIMUM |
| DIAMETER | 1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.316 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
| FIRST END LOCATION | UNTHREADED END |
| FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.190 INCHES NOMINAL |
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 8.840 INCHES NOMINAL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8640 OR STEEL COMP 8740 OVERALL |
| SECOND END COUNTERBORE DIAMETER | 0.343 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.190 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED AND COUNTERBORED |
| SPECIAL FEATURES | HOLES GROOVES STYLE |
| STYLE DESIGNATOR | CIRCULAR GROOVE |
| SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY2 CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |