| SECOND HOLE DIAMETER | 0.078 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| SPECIAL FEATURES | THRU HOLE 0.125 TO 0.130 IN. 1.454 IN. NOM FROM EACH END 90 DEG OF OTHER TWO HOLES |
| SUPPLEMENTARY FEATURES | 30 IN. HOOK SPRING SUPP |
| PIN OVERALL DIAMETER | 0.3100 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM |
| SURFACE TREATMENT | OXIDE FILM AND PASSIVATE OVERALL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.360 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-8937 MIL SPEC 1ST TREATMENT RESPONSE OVERALL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.078 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.160 INCHES MINIMUM AND 2.170 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR MIL-H-6875 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| PIN OVERALL LENGTH | 2.903 INCHES MINIMUM AND 2.913 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |