|
|
|
National Stock Number:
5315-01-165-2010
Federal Supply Class:
5315
National Item Identification Number:
011652010
Description:
PIN,TAPERED,THREADED
Detail:
A CONE-SHAPED HEADLESS ITEM, HAVING A THREADED PORTION AT EITHER END. IT IS USED FOR ALIGNING, FASTENING, AND THE LIKE BY FITTING INTO A CORRESPONDING TAPER REAMED HOLE.
|
Manufacturer Information:
| 14-32207-3 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-32207-3 | 1HJ06 | LBL PRODUCTS | | 14-32207-3 | 305Q5 | OWEN'S FASTENERS, INC. | | 14-32207-3 | 50036 | MIL-CRAFT MFG. INC. | | 14-32207-3 | 60529 | STERLING MFG AND SUPPLY INC | | 14-32207-3 | 6M132 | SKYSPARES PARTS INC | | 14-32207-3 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 14-32207-3 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| FIRST END LOCATION | SMALL END | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844 CL 1 COND E MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.100 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SPECIAL FEATURES | HAS 0.500 IN. DIA CIRCULAR GROOVE 2.230 IN. LG STARTING 1.530 IN. FROM SMALL END,0.312-24 UNJF-2B THDS 0.500IN. DP IN OPPOSITE END | | STYLE DESIGNATOR | THREADED AT SMALL END | | TAPER MINOR DIAMETER | 0.512 INCHES MINIMUM AND 0.514 INCHES MAXIMUM | | TAPER | 0.500 PER FOOT IN INCHES | | TAPER LENGTH | 4.180 INCHES NOMINAL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.640 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF |
|
|