| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.900 INCHES NOMINAL |
| FIRST END LOCATION | UNTHREADED END |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| OVERALL LENGTH | 8.900 INCHES NOMINAL |
| SECOND END COUNTERSINK ANGLE | 59.5 DEGREES MINIMUM AND 60.5 DEGREES MAXIMUM |
| SECOND END COUNTERSINK DIAMETER | 0.438 INCHES NOMINAL |
| SECOND END STYLE | COUNTERSUNK |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SHANK DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| SHANK LENGTH | 1.775 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.750 INCHES NOMINAL |
| SURFACE FINISH | 63.0 MICROINCHES ALL OTHER SURFACES |
| SURFACE FINISH | 8.0 MICROINCHES SHANK END |
| SURFACE FINISH | 8.0 MICROINCHES LARGE SHANK |
| SURFACE TREATMENT | CHROMIUM OVERALL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.380 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| UNDERCUT DIAMETER | 0.375 INCHES NOMINAL |