|
|
|
National Stock Number:
5315-01-158-0418
Federal Supply Class:
5315
National Item Identification Number:
011580418
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10372510 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 1534AS488-5 | 05DN8 | KLUNE INDUSTRIES, INC. | | 1534AS488-5 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 1534AS488-5 | 32067 | MARVIN ENGINEERING CO, INC | | 1534AS488-5 | 4AAQ0 | GARRITY TOOL COMPANY, LLC | | 1534AS488-5 | 5N319 | INDIANA AIRCRAFT HARDWARE, INC. | | 3M39C2-71 | 04348 | LAWRENCE ENGINEERING AND SUPPLY INC | | 3M39C2-71 | 56878 | SPS TECHNOLOGIES, LLC | | 3M39C2-71 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CHAMFER LENGTH | 0.046 INCHES NOMINAL | | DIAMETER | 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.088 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | PIN HEAD DIAMETER | 0.312 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | UNDER HEAD LENGTH | 2.427 INCHES MINIMUM AND 2.447 INCHES MAXIMUM |
|
|