|
|
|
National Stock Number:
5315-01-065-6974
Federal Supply Class:
5315
National Item Identification Number:
010656974
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 11625085 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 11625085 | 85336 | BARNES & REINECKE INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.380 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.370 INCHES MINIMUM AND 8.430 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.382 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP M1010 AND STEEL COMP M1012 AND STEEL COMP M1015 AND STEEL COMP M1017 AND STEEL COMP M1020 OVERALL | | PIN OVERALL DIAMETER | 1.8700 INCHES MINIMUM AND 1.9300 INCHES MAXIMUM | | PIN OVERALL LENGTH | 9.120 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.375 INCHES MINIMUM AND 0.382 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PRIMER OVERALL |
|
|