| ACTUATION METHOD | PUSH BUTTON |
| ACTUATION TYPE | PUSH |
| DETENT TO TAPERED END DISTANCE | 1.620 INCHES MINIMUM AND 1.660 INCHES MAXIMUM |
| DETENT QUANTITY | 2 |
| GRIP LENGTH | 2.625 INCHES MINIMUM AND 2.645 INCHES MAXIMUM |
| HARDNESS RATING | 64.0 ROCKWELL C MAXIMUM SHANK |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SHOULDER TO HEAD END DISTANCE | 2.500 INCHES MINIMUM AND 2.700 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, QUICK RELEASE, POSITIVE LOCKING, "L" HANDLE, SINGLE ACTION, DETENT WRENCH/SAFETY PIN SLOTTED |
| PIN ATTACHMENT TYPE | RING |
| PIN CENTER TO HANDLE END DISTANCE | 6.000 INCHES NOMINAL |
| SHANK DIAMETER | 0.600 INCHES NOMINAL |
| SPECIAL FEATURES | SHANK AND HANDLE SHALL BE CAPABLE OF WITHSTANDING 360 IN LBS TORQUE IN EITHER DIRECTION OVER THEIR ENTIRE LENGTH WITHOUT YIELDING OF MATERIAL;INDENT, STAMP OR CAST "LAU-7 SERIES IN 1/4 INCH CHARACTERIERS ON FRONT OF HANDLE WITH MIL-STD-130;PART SHALL BE DELIVERED WITH NAS 1091-30 WARNER STREAMER ASSEMBLY;INDENT, STAMP OR CAST "SLOTTED" ON BOTH SIDES OF HANDLE IN 1/4 INCH CHARACTERS IN ACCORDANCE WITH MIL-STD-130;INDENT, STAMP OR CAST "PUSH" IN 1/8 INCH CHARACTERS ON FROM OF HANDLE IN ACCORDANCE WITH MIL-STD-130;BREAK ALL SHARP EDGES |
| STYLE DESIGNATOR | L HANDLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |