1450-01-040-1916 PLATE,MISSILE JACK Index 4935-01-040-1918 INTERFACE DEVICE

National Stock Number:
5315-01-040-1917

Federal Supply Class:
5315

National Item Identification Number:
010401917

Description:
PIN,STRAIGHT,HEADLESS

Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.


Manufacturer Information:
837C10023-113499ROCKWELL COLLINS, INC.
837C10023-131218AMI INDUSTRIES, INC


Techincal Specification:
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.125 INCHES NOMINAL
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END TAPER LENGTH0.030 INCHES NOMINAL
FIRST HOLE DIAMETER0.128 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HOLE ARRANGEMENT STYLEONE END DRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 630 OVERALL
PIN OVERALL DIAMETER0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
PIN OVERALL LENGTH2.125 INCHES NOMINAL
SECOND END STYLEROUND
SECOND END OUTER RADIUS0.125 INCHES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SPECIAL FEATURESROUND END HAS 2 PARALLEL FLATS 0.090 IN. MIN 0.093 IN. MAX APART,0.215 IN. LG; HOLE IS DRILLED THRU FLATS


Click here to Register for Free 30-day Trial