|
|
|
National Stock Number:
5315-01-040-0609
Federal Supply Class:
5315
National Item Identification Number:
010400609
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12003071 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.135 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.455 INCHES MINIMUM AND 0.470 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.3120 INCHES MINIMUM AND 0.3130 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.706 INCHES MINIMUM AND 0.726 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.163 INCHES MINIMUM AND 0.169 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | SURFACE TREATMENT | OXIDE OVERALL |
|
|