|
|
|
National Stock Number:
5315-01-037-4702
Federal Supply Class:
5315
National Item Identification Number:
010374702
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10400000606 | K0967 | MBDA UK LTD | | MS16556-828 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS16556-828 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM16556 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| FEATURES PROVIDED | CASEHARDENED | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.130 INCHES MINIMUM AND 0.158 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.1259 INCHES MINIMUM AND 0.1261 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | SECOND END CORNER RADIUS | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM | | SECOND END STYLE | RADIUS | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHEAR STRENGTH | 2600 DOUBLE POUNDS PER SQUARE INCH | | SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 20 DEG MIN,30 DEG MAX; CASE HARDNESS OF 60 HRC MINIMUM; CORE HARDNESS SHALL NOT AT ANY TIME EXCEED THE CASE HARDNESS; CORE HARDNESS OF 47-58 HRC | | SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|