|
|
|
National Stock Number:
5315-01-029-0895
Federal Supply Class:
5315
National Item Identification Number:
010290895
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 549AS120-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.450 INCHES MINIMUM AND 1.460 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.103 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.077 INCHES MINIMUM AND 0.082 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5758 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COBALT COMP MP-35-N OVERALL | | PIN OVERALL DIAMETER | 0.1840 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM | | PIN OVERALL LENGTH | 1.656 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.077 INCHES MINIMUM AND 0.082 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|