|
|
|
National Stock Number:
5315-01-022-7176
Federal Supply Class:
5315
National Item Identification Number:
010227176
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 63-8317 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COMP 4130 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | PIN OVERALL DIAMETER | 0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM | | PIN OVERALL LENGTH | 4.110 INCHES MINIMUM AND 4.130 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SHEAR STRENGTH | 150000 SINGLE POUNDS PER SQUARE INCH | | SPECIAL FEATURES | SLOT ON ONE END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.790 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
|
|