ANGLE BETWEEN CENTERLINE OF HOLES | 90.0 DEGREES NOMINAL |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.175 INCHES NOMINAL |
FIRST END LOCATION | THREADED END |
FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL |
FIRST END STYLE | CHAMFERED |
FIRST HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
OVERALL LENGTH | 5.470 INCHES NOMINAL |
MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 630 OVERALL |
NOMINAL THREAD SIZE | 0.500 INCHES |
SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
SECOND END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
SECOND HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
SECOND END STYLE | CHAMFERED |
SHANK DIAMETER | 0.500 INCHES NOMINAL |
SHANK LENGTH | 0.460 INCHES NOMINAL |
SHOULDER DIAMETER | 0.7485 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
SPECIAL FEATURES | HAS 0.438 IN. DIA,0.750 IN. DP HOLE CENTERED IN SHOULDER END BISECTED BY 0.208 IN. DIA PERPENDICULAR HOLES,2 IN LINE 0.201 IN. FROM END; OPPOSITE END OF SHOULDER HAS 2 PARALLEL FLATS,0.512 IN. W/BETWEEN FLATS |
STYLE DESIGNATOR | SHOULDER |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.420 INCHES NOMINAL |
THREAD SERIES DESIGNATOR | UNF |