| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.490 INCHES MINIMUM AND 5.550 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 316 OVERALL |
| PIN OVERALL DIAMETER | 0.6200 INCHES MINIMUM AND 0.6270 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 5.870 INCHES MINIMUM AND 5.930 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |