|
|
|
National Stock Number:
5315-01-016-5658
Federal Supply Class:
5315
National Item Identification Number:
010165658
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS9468-23 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.139 INCHES NOMINAL | | CHAMFER LENGTH | 0.078 INCHES NOMINAL | | DIAMETER | 0.495 INCHES MINIMUM AND 0.497 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.101 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.094 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.625 INCHES NOMINAL | | UNDER HEAD LENGTH | 1.469 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 32.0 MICROINCHES SHANK END | | SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE |
|
|