5315-01-015-6721 PIN,STRAIGHT,HEADED Index 5315-01-015-6723 PIN,STRAIGHT,HEADLESS

National Stock Number:
5315-01-015-6722

Federal Supply Class:
5315

National Item Identification Number:
010156722

Description:
PIN,STRAIGHT,HEADLESS

Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.


Manufacturer Information:
784123203538LOCKHEED MARTIN CORPORATION
7841232P00103538LOCKHEED MARTIN CORPORATION


Techincal Specification:
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.130 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN HOLES1.542 INCHES MINIMUM AND 1.552 INCHES MAXIMUM
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE10.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
FIRST END TAPER LENGTH0.030 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
FIRST HOLE DIAMETER0.063 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OVERALL
PIN OVERALL DIAMETER0.2501 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM
PIN OVERALL LENGTH1.820 INCHES NOMINAL
SECOND HOLE DIAMETER0.063 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER


Click here to Register for Free 30-day Trial