|
|
|
National Stock Number:
5315-01-009-6800
Federal Supply Class:
5315
National Item Identification Number:
010096800
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 5315010096800 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315010096800 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS9845-19 | 0U583 | SAE INTERNATIONAL | | MS9845-19 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9845-19 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE AS9845 | 0U583 | SAE INTERNATIONAL | | SAE AS9845 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
|
Techincal Specification:
| CHAMFER LENGTH | 0.030 INCHES NOMINAL | | DIAMETER | 0.2494 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.075 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.035 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 615 OVERALL | | PIN CHAMFER ANGLE | 20.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 1.260 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
|