|
|
|
National Stock Number:
5315-01-006-9197
Federal Supply Class:
5315
National Item Identification Number:
010069197
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 3016T38P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| FIRST END LOCATION | BOTH ENDS | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM | | FIRST END STYLE | CHAMFERED | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 0.950 INCHES MINIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK LENGTH | 0.375 INCHES MINIMUM | | SECOND SHANK DIAMETER | 0.169 INCHES MINIMUM | | SECOND UNDERCUT DIAMETER | 0.169 INCHES MINIMUM | | SECOND UNDERCUT WIDTH | 0.040 INCHES MINIMUM | | SHANK DIAMETER | 0.169 INCHES MINIMUM | | SHANK LENGTH | 0.375 INCHES MINIMUM | | SHOULDER DIAMETER | 0.300 INCHES MINIMUM | | STYLE DESIGNATOR | UNDERCUT | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | UNDERCUT WIDTH | 0.040 INCHES MINIMUM | | UNDERCUT DIAMETER | 0.169 INCHES MINIMUM |
|
|