| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.685 INCHES MINIMUM AND 0.705 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.078 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-25043 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 631 OVERALL |
| PIN OVERALL DIAMETER | 0.1860 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.078 INCHES NOMINAL |
| SHEAR STRENGTH | 150000 SINGLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OR CHROMATE OVERALL |