|
|
|
National Stock Number:
5315-00-996-4522
Federal Supply Class:
5315
National Item Identification Number:
009964522
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 3-41680-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 3-41680-1 | 1DDX0 | MACHINE SPECIALTIES, LLC | | 3-41680-1 | 24398 | EAGLE TOOL & MACHINE CO. INC. | | 3-41680-1 | 34705 | CLIFFDALE MANUFACTURING LLC | | 3-41680-1 | 36164 | HEROUX-DEVTEK INC. | | 3-41680-1 | 6Z056 | CM MANUFACTURING INC | | 3-41680-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 3-41680-1 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 3-41680-1 | 98247 | CANADIAN COMMERCIAL CORP |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.435 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.250 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.256 INCHES MINIMUM AND 0.257 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 3.935 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | NA1-1259,76823 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.191 INCHES MAXIMUM | | SHANK DIAMETER | 0.497 INCHES MINIMUM AND 0.499 INCHES MAXIMUM | | SHANK LENGTH | 0.500 INCHES NOMINAL | | SHOULDER DIAMETER | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | SPECIAL FEATURES | HAS 0.375 IN. DIA LONGITUDINAL HOLE,0.150 IN. DP CENTERED IN SHOULDER END; 2 KEY WAYS IN THREADED END; INCLUDES DOWEL PIN PRESSED IN SMALL HOLE | | UNDERCUT DIAMETER | 0.467 INCHES NOMINAL | | UNDERCUT WIDTH | 0.125 INCHES NOMINAL | | STYLE DESIGNATOR | UNDERCUT | | SURFACE TREATMENT | CHROMIUM OVERALL | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.600 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF |
|
|