| EFFECTIVE LENGTH | 1.723 INCHES MINIMUM AND 1.767 INCHES MAXIMUM |
| DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.790 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| GRIP LENGTH | 1.742 INCHES MINIMUM AND 1.784 INCHES MAXIMUM |
| HEAD STYLE | FLAT |
| HEIGHT | 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OVERALL |
| PIN HEAD DIAMETER | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 125.0 MICROINCHES HEAD BEARING SURFACE |
| SURFACE FINISH | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| SURFACE FINISH | 125.0 MICROINCHES HEAD TOP |
| SURFACE FINISH | 32.0 MICROINCHES SHANK END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDERCUT DIAMETER | 0.342 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| UNDERCUT RADIUS | 0.003 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 2.300 INCHES MINIMUM AND 2.320 INCHES MAXIMUM |