|
|
|
National Stock Number:
5315-00-841-8864
Federal Supply Class:
5315
National Item Identification Number:
008418864
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| LT1-575 | 03677 | ANTHONY YORK CO | | W69322 | 04285 | ATHEY PRODUCTS CORP |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.438 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.266 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1040 OVERALL | | PIN OVERALL DIAMETER | 1.2480 INCHES MINIMUM AND 1.2490 INCHES MAXIMUM | | PIN OVERALL LENGTH | 7.000 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | ONE LONGITUDIONAL HOLE 0.125 IN. DIA,3.500 IN. LG,TAPPED 0.125-27 NPT,0.500 IN. DEEP,ONE HOLE BORED 0.094 IN. DIA LOCATED 3.188 IN. FROM TAPPED END | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|