|
|
|
National Stock Number:
5315-00-811-1050
Federal Supply Class:
5315
National Item Identification Number:
008111050
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10942225 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.187 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.375 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | SPECIAL FEATURES | 0.125 IN. DIA HOLE ON A END 0.750 IN. FROM A END ON SAME PLANE WITH OTHER 2 HOLES | | PIN OVERALL DIAMETER | 0.2460 INCHES MINIMUM AND 0.2480 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.781 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL |
|
|