|
|
|
National Stock Number:
5315-00-805-5299
Federal Supply Class:
5315
National Item Identification Number:
008055299
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 4H3119 | 11083 | CATERPILLAR INC | | 8599186-137 | 09691 | L3HARRIS MAS INC | | 8599186-137 | 24617 | GENERAL MOTORS CORP | | 8599186-137 | 99974 | DELCO ELECTRONICS CORP DELCO SYSTEMS OPNS |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.010 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PIN OVERALL LENGTH | 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1880 INCHES MINIMUM AND 0.1884 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 2.0 DEGREES MINIMUM AND 8.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SURFACE FINISH | 63.0 MICROINCHES CHAMFERED END | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|