|
|
|
National Stock Number:
5315-00-801-1933
Federal Supply Class:
5315
National Item Identification Number:
008011933
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 8011933 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.359 INCHES MINIMUM AND 5.391 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416 OVERALL | | PIN OVERALL DIAMETER | 0.3120 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.609 INCHES MINIMUM AND 5.641 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
|
|