|
|
|
National Stock Number:
5315-00-771-9104
Federal Supply Class:
5315
National Item Identification Number:
007719104
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 101347 | 99832 | SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC | | 161347 | 99832 | SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC | | 4E13121 | 99832 | SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.750 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.625 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1045 OVERALL | | PIN OVERALL DIAMETER | 0.8740 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.000 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | BOTH ENDS DRILLED 0.3438 IN. DIA,0.875 IN. DEEP AND TAPPED 1/8 IN. NPT,CENTER CUT,0.6404 IN. RADIUS,BOTTOMING 0.6094 IN. FROM OPPOSITI SIDE |
|
|