5315-00-765-2917, PIN,STRAIGHT,HEADLESS

National Stock Number:
5315-00-765-2917

Federal Supply Class:
5315

National Item Identification Number:
007652917

Description:
PIN,STRAIGHT,HEADLESS

Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.

Manufacturer Information:

MS16556-732

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FIRST END STYLE	CHAMFERED
FIRST END TAPER ANGLE	20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
FIRST END TAPER LENGTH	0.062 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 410 OR STEEL COMP 416 OVERALL
PIN OVERALL LENGTH	3.000 INCHES NOMINAL
PIN OVERALL DIAMETER	1.0000 INCHES NOMINAL
SECOND END STYLE	CHAMFERED
SECOND END TAPER ANGLE	4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
SECOND END TAPER LENGTH	0.089 INCHES NOMINAL
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
SPECIAL FEATURES	SMALL CHAMFER END MAY HAVE 0.062 IN. MIN 0.125 IN. MAX RADIUS IN LIEU OF CHAMFER
SURFACE FINISH	16.0 MICROINCHES OUTSIDE DIAMETER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL

Click here to Register for Free 30-day Trial