| CRITICALITY CODE JUSTIFICATION | ABHP AND ABPA AND AAVH AND AAZE AND AATR |
| FIRST END LOCATION | THREADED END |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL |
| OVERALL LENGTH | 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| SECOND END STYLE | SQUARE |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND SHANK DIAMETER | 0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| SECOND UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND UNDERCUT WIDTH | 0.031 INCHES NOMINAL |
| SHANK DIAMETER | 0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| SHANK LENGTH | 0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.313 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| SPECIAL FEATURES | HOLE 0.0120 DIA,1/8 INCH DEEP DRILLED IN CENTER OF SQUARE END |
| STYLE DESIGNATOR | UNDERCUT |
| SURFACE FINISH | 125.000 MICROINCHES OVERALL |
| UNDERCUT DIAMETER | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.031 INCHES NOMINAL |