|
|
|
National Stock Number:
5315-00-763-1293
Federal Supply Class:
5315
National Item Identification Number:
007631293
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10911984 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 2530007631293 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| CHAMFER LENGTH | 0.060 INCHES NOMINAL | | DIAMETER | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO FLAT | 0.375 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.187 INCHES NOMINAL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM OVERALL | | HEAD STYLE | DEE | | HEIGHT | 1.690 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CL 420 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 420 OVERALL | | PIN HEAD DIAMETER | 0.750 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | THD HOLE THRU HEAD,1/4-20 UNC 2B THD,0.252 IN. W BY 0.560 IN. DEEP SLOT CENTERED IN TOP OF HEAD,HEAD IS OFFSET AND COVERS HALF OF PIN DIA | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | UNDER HEAD LENGTH | 2.370 INCHES NOMINAL |
|
|