|
|
|
National Stock Number:
5315-00-722-3452
Federal Supply Class:
5315
National Item Identification Number:
007223452
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 416B592P2 | 07482 | GENERAL ELECTRIC COMPANY | | 416B592P2 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.080 INCHES MINIMUM AND 0.087 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | COBALT COMP L-605 OVERALL | | PIN OVERALL LENGTH | 0.890 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1867 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.080 INCHES MINIMUM AND 0.087 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER |
|
|