|
|
|
National Stock Number:
5315-00-709-4131
Federal Supply Class:
5315
National Item Identification Number:
007094131
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 2-40420 | 32775 | W. S. TOOLING, INC. | | 2-40420-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 2-40420-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 2-40420-1 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.960 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.141 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST HOLE DIAMETER | 0.076 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 1.242 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OVERALL | | SECOND HOLE DIAMETER | 0.076 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK DIAMETER | 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.941 INCHES NOMINAL | | SHANK DIAMETER | 0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM | | SHANK LENGTH | 0.231 INCHES NOMINAL | | SHOULDER DIAMETER | 0.375 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
|
|