|
|
|
National Stock Number:
5315-00-689-8714
Federal Supply Class:
5315
National Item Identification Number:
006898714
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 69312A9-7 | 27541 | TRANSAERO, INC. | | 69312A9-7 | 45934 | ONTIC ENGINEERING & MANUFACTURING, INC | | 69312A9-7 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | 69312A9-7 | 96916 | FLEET READINESS CENTER EAST DIV DEPARTMENT OF NAVY | | 69312A9-7 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CHAMFER LENGTH | 0.047 INCHES NOMINAL | | DIAMETER | 0.0995 INCHES MINIMUM AND 0.1005 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.095 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.038 INCHES MAXIMUM | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEIGHT | 0.047 INCHES NOMINAL | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PIN HEAD DIAMETER | 0.218 INCHES NOMINAL | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND 17.0 DEGREES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 0.566 INCHES NOMINAL |
|
|