|
|
|
National Stock Number:
5315-00-687-2405
Federal Supply Class:
5315
National Item Identification Number:
006872405
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 0450-047 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PIN OVERALL LENGTH | 0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1254 INCHES MINIMUM AND 0.1257 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 2.0 DEGREES MINIMUM AND 8.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE FINISH | 63.0 MICROINCHES CHAMFERED END | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|