|
|
|
National Stock Number:
5315-00-682-1726
Federal Supply Class:
5315
National Item Identification Number:
006821726
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10122692 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 103857 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS LLC | | 1Q4A901882 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5315006821726 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | B68006 | K0967 | MBDA UK LTD | | MILP21143CLASS1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS16555-617 | 45078 | DOWELS PINS AND SHAFTS INC | | MS16555-617 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS16555-617 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM16555-617 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.056 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL | | PIN OVERALL LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0939 INCHES MINIMUM AND 0.0941 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHEAR STRENGTH | 1000 DOUBLE POUND | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|