| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| FIRST END LOCATION | SHORT SHANK END |
| FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4130 OVERALL |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| SECOND END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| SECOND END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND SHANK LENGTH | 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| SHANK LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| SHOULDER WIDTH ACROSS FLATS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 63.000 MICROINCHES OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNC |